Free delivery for orders over £50* 
01923 444676 01923 444677  
Hello guest
Your basket is empty
You are in: All categories > FARECLA


The G360 Super Fast System Compound Kit contains:

1 x G360 Super Fast Compound – 1 Litre.
1 x G-Mop Super High Cut Pad – 6″/150mm
1 x G Mop Flexible Yellow Compounding Foam – 6″/150mm
1 x Process Chart

Quantity discounts:
2+ £45.00

No P3000 discs required Super fast cutting action Transparent in use Easy glide technology

For best results and longer pad life we recommend the G Mop Flexible Back Plate for 6″ Pads

Don’t overapply – use between 30% and 50% less compound than you would normally use with other brands. Use sparingly – too much incurs additional and unnecessary cost, extra clean up time, and can clog the pad reducing effectiveness of cut.
For optimum performance in removing P1500 sanding scratches always use the Super High Cut Pad (GMC650). This reduces the need to use P3000 which reduces cost and cycle time.

When using a rotary polisher ensure the machine speed is set to the correct level between 1500 and 1800 RPM – too low or too fast will result in low product performance and increase polishing cycle time.
Apply light pad pressure. Don’t lean on the polisher or hold it at too steep an angle – it might sometimes cut quicker, but holograms and therefore reworks can result.
Don’t polish for too long – this can put micro-scratches into the surfaces, which then take more time to get out. Using products that have a transparent film can help.
Knead a brand new foam before first use and prime it with compound – this stops any initial “scratchiness” and prompts more effective polishing at the outset.
Always spur foam and wool polishing pads regularly. Wash them out with warm water and leave to dry overnight to prolong the life of pads.– a build-up of compound from previous jobs will reduce cut and cause skating. Dried compound can put scratches into the surface.
Avoid polishing under-cured paint (paying particular attention to the baking oven panel bake temperature and cold spots, gun set-ups, spraying technique. Soft paint cannot be polished effectively and may require reworking at a later stage.
Always use two microfibre cloths (dirty and clean) – learn the folding technique for always using a clean section of microfibre to avoid marring the finished surface.
Finally, good housekeeping is paramount to a successful outcome. Ensure all machinery is in a well maintained and clean state ensure all pads are washed and spurred regularly.

We use FedEx for our delivery services for all online orders.

Our deliveries will only be delivered Monday to Friday ONLY.

Free delivery must be for value of goods before VAT rate and delivery charge.

All deliveries are sent SAME WORKING DAY if orders are placed before 11am.

We aim to dispatch all orders within 1 working day.

There will be times when we are out of stock of particular stock lines / quantity's but you will receive an email or phone call from a member of staff advising you of a timescale.

Once your order has been dispatched you will receive an automated email confirmation.

With international delivery's there might be a customs delay.

** UK - Mainland Delivery Chargers **

Our standard delivery is charged at £5.95 +VAT on all UK Mainland orders under 20Kg.

Over 20kg orders are charged at £12.95 +VAT on all UK Mainland orders.

Free delivery for orders over £100 apply to UK Mainland buyers.

** UK - Scotland Delivery Chargers **

Our standard day delivery is charged at £6.95 +VAT on all Scotland orders under 20Kg.

Our standard day delivery is charged at £14.95 +VAT on all Scotland orders over 20Kg.

Free delivery for orders over £100 apply to Scotland buyers.

** UK - Northern Ireland Delivery Chargers **

Our standard day delivery is charged at £9.50 +VAT on all Northern Ireland orders under 20Kg.

Our standard day delivery is charged at £14.95 +VAT on all Northern Ireland orders over 20Kg.

Free delivery for orders over £150 apply to Northern Ireland buyers.

Your item must be in its original packaging condition to be returned.
You must return the item within 14 days of your purchase.

  1. Please email to request a refund stating a reason for your return
  2. Once we have approved your return you must return your package to:

Bodicraft Supplies Ltd
1 Chalk Hill
WD19 4BL

  1. Include in your package a signed letter stating the reason for your return and a copy of the original receipt.
  2. For all returns the customer must pay for return shipping costs.

** Restocking Fee **

All items are subject to a 15% restocking fee, this will be deducted from your refund.
We also do not refund the original shipping or return costs that you paid on the order.

Customer reviews

This product has not yet been reviewed
Our site uses cookies, including for advertising personalisation. For more information, see our cookie policy. Accept cookies and close
Reject cookies Manage settings